FAQs
More FAQs- Isn't it hard to fix an area that is damaged? What if I drag a large piece of furniture across it and leave a gouge?
- We've already had deep cleaning and disinfection done in our facility, doesn't that cover it?
- How long will it take to have my floors coated with acrylic?
Urethane finish is relatively easy to repair. Call the professionals at ServiceMaster Clean serving Burlington, Hamilton, Oakville, Milton, Guelph and let us repair the damaged area.
The purpose of disinfection is for infection control to help ensure the health and safety of your facility and its occupants. Surface contamination can and is likely to recur. Once a surface has been disinfected, that same surface can easily be re-contaminated when the next passerby touches that surface or sneezes or coughs near that surface. As such, infection control is about regular and consistent cleaning and disinfection. Unless an occupant has been diagnosed with a confirmed case of an illness, you will likely not need to regularly perform deep cleaning and disinfection. However, to keep your facility healthy and safe, what you should be maintaining is your standard cleaning protocols with the addition of regular and consistent disinfection of high touch points.
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.