Welcome to ServiceMaster Clean serving Burlington, Hamilton, Oakville and Milton

A key consideration in determining how often you should be disinfecting is based on the traffic level in your facility. As disinfection is for infection prevention, the goal is to help to mitigate surface-to-person transmission of pathogens. If your 10,000 SF office will be occupied by 5 staff and no visitors, you can likely disinfect less frequently than that same office which might house 60 staff and consistent visitors. Additional considerations include how often multiple people may be touching the same surface as well as whether an antimicrobial surface protectant has been applied. At minimum, however, we would recommend daily disinfection of high touch surfaces. If the traffic in your facility is high, we would recommend increasing this frequency to multiple times per day. For example, common elevator lobbies in an office tower should be disinfected multiple times per day, particularly at the entrance level.

Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.

Construction clean-up is a service provided to brand new buildings or buildings that are being remodeled. While building contractors will do a general clean-up of construction debris, a detailed clean is required to remove all the dust and dirt left behind.

Depending on the type of carpet we’re cleaning, you may notice a faint scent. This is especially prevalent when cleaning wool carpets. The amount of time it takes for the odour to dissipate is usually within an hour but varies based on air circulation, heat and humidity. A big difference in the way ServiceMaster Clean serving Burlington, Hamilton, Oakville and Milton cleans carpet compared to many of our competitors is that we do not put soap in our rinse water. We pre-spray the carpets, remove the spots, then use clean water extraction to ensure that we do not leave any soapy residue behind. This allows for fresh, clean carpets